Indl Silicone HR 400 Aluminum is a high heat resisting aluminum finish based on silicone resin that could with stand up to 400°C / 750°F continuous service temperature. It is applied directly to blast cleaned steel substrate or over a properly primed steel.
For use on furnace, boilers, exhaust, stock, and other industrial and marine environment with similar operating temperature.
Silver or Aluminum
Dry hard : 1 hour when heated to 200°C
Apply one coat at normal atmospheric condition. Suspend painting when surface temperature is 50°C / 125°F and above. Normally applied without reduction.
Sandblast to Sa 2.5 or power tool cleaning to St-3 to remove mill scale or corrosion. For optimum metal protection sandblast is recommended.
Spot repair by sandblast or power tool corroded or damaged area. Scrape loose paints; intact and sound portion be cleaned free of salt deposits and other barriers. Let dry before coating.
4L lithographed round cans